Switch language on mac keyboard. How to switch the language on the keyboard on a MacBook. How to switch language on Mac OS

Even though MAC OS X has done quite a bit long way improvements, they still have some inconveniences, for example, few people know how to switch the language on a MacBook.

This is due to the fact that there is no shortcut for changing the keyboard layout in this OS, so most new users are faced with the problem of not knowing how to change the language on a MacBook. But in fact, changing the layout is quite simple.

Changing the layout

So, you can change the layout by simultaneously pressing the space bar and the Cmd key. But the problem may be that this combination will already be assigned to the search string call. Therefore, before switching the language on the keyboard on your MacBook, you need to go to “System Preferences,” then select “Keyboard” and select “Keyboard Shortcuts” for Spotlight.

how to switch language on keyboard on macbook

In order to learn how to change the language on a MacBook on the keyboard, you need to carefully follow the following instructions.

You need to go to the “Keyboard” and “Input Sources” item, where you will need to activate the same layout combinations to change it.

how to switch language on macbook

Moreover, before changing the language on the keyboard on a MacBook, you need to understand the fundamental difference between choosing the next and previous input source option. In the case when you use the combination of the “Space” and “Cmd” keys, the layout will return to the previous one, and when you press it again, it will again become the same as it was before. Switching will occur exclusively between 2 languages.

For those people who need more than two languages, you need to use the shortcut “Space” + “Option” + “Cmd”. Therefore, before changing the language on your MacBook, it is best to swap the key combinations for greater convenience. But if you don't use them that often, you can leave everything as is.

Russian layout

How to change the language on a MacBook to Russian? If you have not added the Russian layout, you can do this manually in the “System Settings” menu, then go to “Keyboard”, then “Input Source”. Here you need to find the Russian layout, it will be called “Russian-PC”.

If necessary, in the same menu you can delete unused layouts or add new ones. In general, experts recommend installing “YouType”. After this, the active layout will always be displayed near your mouse cursor.

How to switch language on Mac OS

To switch the language on a Mac, use the cmd+space combination, similar to Shift+Alt in Windows. In recent versions of Mac OS, the default combination is ctrl+spacebar.

If in this case the language has not changed, then you need to add it in the Mac OS settings. To do this, click on the apple in the top left and open the “System Settings” menu item.

In your Mac's settings window that opens, select "Language and Region."

In the next window you will see a list of currently enabled languages; if yours is not in it, click the plus sign and add the required one.

After the above manipulations, the language in your MacBook will switch as it should, when you press cmd+spacebar.

By the way, if you do not release the cmd key after pressing this combination, after a split second you will see a list of connected languages ​​on the screen and you will be able to switch between them not at random, but knowing which one you have currently selected.

This is very convenient if you use more than two foreign languages on the computer.

If the cmd+spacebar shortcut does not work and the language does not switch, try using ctrl+spacebar, as this is what is installed in the latest versions operating system Mac OS X by default.

You can check which key combination for changing the language you have installed, and also reassign the function of changing the layout to keys that are more convenient and familiar to you in the computer settings in the following way.

Why does the language switch the second time?

After updating to the latest version of the Mac OS operating system, many users began to complain that when they try to switch the language, the checkbox in the status bar changes, but the language remains the same, and only after the second click does the layout switch.

If you encounter this problem after upgrading to the new Mac OS Sierra operating system, the reason most likely lies in a hotkey conflict.

In the new version of Apple's OS, they added the Siri voice assistant, well known to all iOS users, which by default is called, as you might think, by pressing and holding the cmd+space keys at the same time, which results in a program conflict (if you have configured to change the language for the same combination).

If you encounter the same problem and the language on your Mac does not switch the first time, then go to the settings of the Siri voice assistant and change the keyboard shortcut for calling it to any other that you do not use anywhere else.

To do this, open Mac OS System Preferences and open the item called Siri.

If you don't use Siri on your Mac, you should simply turn it off. To do this, uncheck the box next to “Enable Siri”.

That's it. After you do one of the above steps, the hotkeys for changing the language will no longer conflict with the Siri hotkeys, and your Mac's layout will switch again the first time, just like before.

macOS Sierra: Change the language your Mac uses

How to change the MAC OS interface language [Instructions]

So, below I have given a procedure that will help you change the MAC OS interface language. Personally, I need this to take screenshots for another site that I fill with English-language content. It just so happens that there is completely different money on the English-language Internet... But that’s another story... If you want, I’ll tell you in more detail in a separate article.

In the meantime... To change the MAC OS interface language, do this:

Step 1 Go to System Settings - Language and Region

Step 2 The Preferred languages ​​box should be set to the language you want to use as your primary language. All interface labels in MAC OS are displayed in the language that is accepted as the main one.

Step 3 And here I got stuck... In fact, you need to pull the required language and place it at the top of the list. Elementary, Watson! But it’s not intuitive at all, Holmes!

Step 4 Now close the settings window and restart your computer. Next time the system will boot with a different interface language.

How to change the keyboard layout language in MAC OS

The very first question that people who encounter MAC computers for the first time ask is “Well, how can I change the language here... I want to type in Russian/English.” Again, everything is simple. On MACs, this is done using the Command + Space key combination. This is the default combination and 99% of all MAC users use it. If this is not convenient for you, you can change it in the same Language and Region window by clicking on the Keyboard Settings button at the bottom of the window.

I hope this instruction will not gather dust on the back of the site and will help someone. I ask everyone to like the article they liked most on the site. This will really help me develop this site. Thank you.

1. Lana 10/06/2018

   Super! Thanks for the useful information! Helped me))

2. Mikhail 01/29/2019

   Shine! Everything ingenious is simple! Thank you!

3. Anatol 02/01/2019

   thank you very much good man

4. Diver 04/01/2019

   MacBook Pro 2016, switch layout control + spacebar

   • Max 04/06/2019

     Layouts yes. And the interface language changes as described in the article.

Owners of Apple computers have to adapt to a different style of interaction with the operating system. The behavior of windows and the layout of menu items differs from what Windows users are accustomed to. The keyboard contains a different set of control keys, and, accordingly, the familiar order of combinations changes. Today we will look at the layout settings provided on Apple computers and figure out how to switch the input language on a MacBook.

Switch layout from menu bar

The right side of the macOS menu bar at the top of the screen plays a role similar to the system tray area in Windows. Here system information about time, date, network connection and the keyboard layout we need is displayed.

Language switching icon on the top menu bar

The current input language is indicated by the location country flag. The international keyboard, with the standard English QWERTY layout, is designated by the letter “A” by default. For convenience, it can be replaced with the flag of an English-speaking country. Clicking on the layout icon displays the pop-up menu shown in the screenshot, containing four sections:

1. switch input language, the current one is indicated by a tick;
2. display the on-screen keyboard or panel for typing emoticons and additional Unicode characters;
3. highlighting the current layout; the name specified in the first paragraph will be displayed next to the flag in the menu bar;
4. section of the operating system settings responsible for assigning keyboard parameters.

Input Sources Menu

By calling this menu, you can use the first section to change the input language from English to Russian and vice versa.

Changing hotkey combinations

The change in standard keyboard shortcuts described above is caused by the appearance of the Siri voice assistant in macOS. To quickly call it, Cupertino engineers reserved the Command + Space combination in the system. This is where the force of habit comes into play. Some will agree with the keyboard shortcut proposed by Apple, while others will want to return everything to the way it was before. If you belong to the second category of users, go to the keyboard settings section. To do this, you can use the previously described top line menu item or open general system settings:

1. Select the section indicated by the frame in the screenshot.

   Keyboard options in system settings

2. Having opened the keyboard settings parameters, in the top menu of the window, select the tab shown with the number “1”. On the left side we find the “Input Sources” section. On the right side of the window, select the item responsible for changing the input source. By clicking on the area indicated by the arrow, we activate the window with the keyboard shortcut. The screenshot shows how to change the standard system combination to the one previously used in macOS.

Changing the keyboard shortcut

The language does not switch the first time, what should I do?

After changing the layout in the settings, some users encounter a problem. The keys have been reassigned to be more convenient, and switching does not always work the first time. This happens due to a conflict of keyboard shortcuts and is easily fixed.

Eliminating combination conflicts in settings

To avoid repetition and possible conflicts when using key combinations, macOS developers have provided a notification system. With its help, you can easily find a problematic combination and make the necessary adjustments to the settings.

1. When setting the keyboard shortcut that will be used on your Mac to change the layout, pay attention to the presence of icons with exclamation marks indicated by the number “2”. This way the system lets you know that this combination is already in use. Problematic sections are marked on the left side of the window, and repeating combinations are marked on the right. You need to configure a combination that will not be duplicated for another system application.

   System error when specifying a duplicate key combination

2. Another source of problems can be the automatic detection of the language used in the document. If delays or false alarms occur during the change process, you need to go to the keyboard settings. On the “Input Sources” tab, uncheck the box indicated by the arrow.

   Cancel automatic language detection in a document

Changing Siri call options

As we already know, Siri was included in the macOS distribution in 2016. The default settings for quickly calling the voice assistant are to hold down the Command and Space keys. In other words, a key combination similar to that traditionally used to change the layout is used. If you are not a fan of the voice assistant, you can disable it completely or change the settings to remove the conflict when switching input languages.

1. Go to system settings and find the Siri section indicated in the screenshot.

   Siri in system settings

2. The switch marked “1” allows you to completely disable the voice assistant function. The area marked with a two is intended for changing keyboard shortcuts. By clicking on it, we expand the pop-up menu.

   Siri Settings

3. In order not to disable Siri completely, but to be able to use it as needed, we assign a new key combination. This way we eliminate potential conflict when changing layouts.

Siri shortcut menu

How to switch layout with three languages ​​installed

After installing an additional layout into the system, the user may encounter an unpleasant surprise. Changing layouts using hotkeys is performed only between the last two languages. Switching must be done using the drop-down menu on the top line. However, before sinning on the imperfection of the OS, let's figure out what's going on.

Using the OSD Menu

The standard switching option will work, but slightly differently. If you hold down the Command key and then press the space bar, an additional menu will appear on the screen with a list of installed languages.

OSD menu for switching layouts

Each repeated press of the spacebar leads to a sequential search of layouts.

Advanced layout change option

Not everyone likes the option of switching using the on-screen menu. Meanwhile, macOS already provides ready-made solution. There is a special combination for quickly changing layouts when installing three or more language packs:

1. Open the OS settings and go to the keyboard settings section.
2. We find the tab in which we changed the hot keys. The number “three” indicates a keyboard shortcut that allows you to change the input language without displaying an additional menu.

Input source selection menu

When using the combination indicated in the screenshot, a sequential transition between language packs is performed, accompanied by a change of flags in the top line of the system menu.

Using Punto Switcher to switch input sources

Knowing how to change the input language on a MacBook using standard means, let's consider the option of using third-party software for this purpose. The Punto Swither program was developed specifically for automatically changing the keyboard layout. Its algorithms are based on so-called “impossible combinations” of letters. By detecting them, the program automatically changes the language and converts incorrectly typed text.

1. You can download the latest version of Punto Switcher to install on your Mac from the servers of Yandex, which is the owner of the program. It is distributed as an archive containing a standalone installer in PKG format.

   Punto Switcher installer menu

2. At the final stage of installation, the program provides configuration recommendations. By clicking on the marked button, we go to the security section of the operating system.

   The last step of installing Punto Switcher

3. The “Universal Access” area opens on the left side of the window. The programs included in it are considered trusted and are allowed to control the computer. To add Punto Switcher you need to click on the “+” icon and select it from the list of installed ones. The switch opposite the program icon must be checked. Thus, we allow it to automatically start when the operating system starts and control the switching of layouts.

   Adding permission to manage the system

4. The Punto Switcher icon will appear on the top menu bar. By clicking on it, we expand the main settings. We check that the automatic switching mode is turned on.

Punto Switcher icon and menu

After completing these steps, the program will begin to perform its task, changing the language layout depending on the entered text.

>In conclusion

A number of MacBook users may encounter the impossibility of changing the language using the keyboard. Standard Windows OS tools - the Ctrl+Shift or Alt+Shift keys on a MacBook do not work, pressing these keys does nothing, and the user has no idea how to select the desired language. In this material, I will tell you how to switch the language on a MacBook, what key combinations are used for this, and how to create a convenient key combination to change the language used.

How to switch language on MacBook - methods

To change the language on a MacBook, you have three different options:

By the way, if you press the keys "Command" + "Space", and then do not release the “Command” key, then a visual language selection menu will appear, and you will be able to clearly observe which language you are choosing.

There are also situations when using this key combination does not switch the language in the MacBook the first time, and you need to press this key combination twice. It's related with keyboard hotkey conflict, when the same combination (in in this case The keyboard shortcut Command+Space) uses two different functions (the first is to switch the language, and the second is to activate the Siri voice assistant). I will tell you how to get rid of this problem at the end of the article.

How to add the desired language to system settings

It’s not enough to know how to change the language on a MacBook; it’s also important to have the language we need in the list of installed ones on the system. To add the desired language, follow these steps:

How to change the keyboard shortcut to change the language

So, how to change the keys to switch the language on a MacBook? Do the following:

How to get rid of conflicts with Siri

If switching the language in the MacBook does not work the first time, then it is quite possible that the conflict of the same type of keys involved, which also causes the activation of the Siri speech assistant, is to blame for this problem.

1. To get rid of this conflict, go to “System Settings” again;
2. Find “Siri” there, and in the “Keyboard shortcut” option, select a different combination;
3. And if you don’t use Siri, then turn off the assistant altogether by unchecking the “Enable Siri” option;
4. Now you can easily and without delay switch the language on your MacBook.

Conclusion

IN this material I looked at options on how to switch the language on a MacBook and what key combinations are used for this. In most cases, to change the language, it is enough to press the “Command” + “Space” key combination, but if for some reason they do not work, then you need to enter the system settings and set the key combination that is most handy and convenient for this user .

Most Russian-speaking owners of Mac computers use two languages ​​when working - Russian and English, one of which is the main system one (all menus, windows, etc. are displayed in this language). One of the first questions for a Mac newbie is: “ How to switch language on Mac keyboard". In this material we will tell you how to switch, add and change system languages on Apple computers.

How to add a new language to macOS?

1 . Open menu  → System settings...

2 . Go to the section " Language and region».

3 . At the bottom of the left side menu with languages, click on the plus sign (“ + »).

4 . Select the language you are interested in from the list and click the “add” button. If you need to add several languages ​​at once, press and hold the key Command (⌘).

5 . A message will appear asking you to select the primary language that will be the system language. That is, all dialog boxes and other macOS interface elements will be in the selected language. In order to apply new language as a system one, you will need to restart your Mac.

How to change language on Mac

There are at least three ways to switch the language on Mac:

1 . Clicking on the checkbox in the menu bar.

2 . Using keyboard shortcuts Ctrl + Space or Command (⌘) + Space.

3 . The most convenient way to switch languages ​​is to use an application that allows you to automatically change the keyboard layout on your Mac.

You will never have to change the layout at all - the program will do everything for you. For example, if you installed English language and you start writing the word ghbdtn, then after pressing the space bar, the typed word will automatically turn into “hello”, and subsequent words will already be typed in Russian and vice versa. Very convenient.

Despite the fact that MAC OS X has come a long way in terms of improvement, it still has some inconveniences, for example, few people know how to switch the language on a MacBook.

This is due to the fact that there is no shortcut for changing the keyboard layout in this OS, so most new users are faced with the problem of not knowing how to change the language on a MacBook. But in fact, changing the layout is quite simple.

Changing the layout

So, you can change the layout by simultaneously pressing the space bar and the Cmd key. But the problem may be that this combination will already be assigned to the search string call. Therefore, before switching the language on the keyboard on your MacBook, you need to go to “System Preferences”, then select “Keyboard” and there select “Keyboard shortcuts” for Spotlight.

In order to learn how to change the language on a MacBook on the keyboard, you need to carefully follow the following instructions.

You need to go to the “Keyboard” and “Input Sources” item, where you will need to activate the same layout combinations to change it.

Moreover, before changing the language on the keyboard on a MacBook, you need to understand the fundamental difference between choosing the next and previous input source option. In the case when you use the combination of the “Space” and “Cmd” keys, the layout will return to the previous one, and when you press it again, it will again become the same as it was before. Switching will occur exclusively between 2 languages.

For those people who need more than two languages, you need to use the shortcut “Space” + “Option” + “Cmd”. Therefore, before changing the language on your MacBook, it is best to swap the key combinations for greater convenience. But if you don't use them that often, you can leave everything as is.

Russian layout

How to change the language on a MacBook to Russian? If you have not added the Russian layout, you can do this manually in the “System Settings” menu, then go to “Keyboard”, then “Input Source”. Here you need to find the Russian layout, it will be called “Russian-PC”.

If necessary, in the same menu you can delete unused layouts or add new ones. In general, experts recommend installing “YouType”. After this, the active layout will always be displayed near your mouse cursor.

Many people are interested in how to set multiple keyboard languages ​​available at the same time on Mac OS X. The Test Language module allows you to change the language in menus and tooltips, and customize wildcards for dates, units of change, time, and other notations. , which are used in a particular country. Don't know how to switch the language on your MacBook for typing? Thanks to this module you can also load an alternative English or even make different variations on

Working with the module

First, click on the System Preference icon or click on the Apple icon in the top left corner, and then click on the System Preferences button. After that - “View” - “Language and text”.

Select from the list the languages ​​you want to make available for your keyboard layout. Speaking about how to change the language on a MacBook, it should be noted that you can select several options for later use. If you are setting multiple items, click the Show Input Menu in Menu Bar button to make all selections available when you click the checkbox icon in the menu bar located at the top of the screen. For example, if it is currently displayed you can click on it and select a different keyboard language from the drop-down menu.

If you want the foreign keyboard to be available at all times, go to System Preferences and click the Accounts button, then select Sign-in Options. Click the Lock button and enter your password in and then select “Show input menu in login window”. When you log out and log back in, a drop-down menu with your selected keyboard layouts will appear on the screen next to your account name and password entry field.

Many people are interested in how to switch the language on a MacBook because adding additional input options allows you to use documents or emails that contain characters that are not included in the standard English keyboard. Remember that Mac OS allows users to install additional languages input and switch between them while editing documents. As mentioned above, you can add alternative options input to your Mac from the System Preferences app. In addition to the method of saving settings, there is a simple option for changing the language, which will be performed during one working session.

on a MacBook, adding a new one while working?

Open the Apple menu and click System Preferences. Select Language & Text from the View menu. Go to the Input Sources tab and select the additional input languages ​​you need to use.

How to switch the language on a MacBook from those already installed?

Click the checkbox in the top right corner of the screen. Select the desired input language from those available in the menu. Close it and continue working. As you can see, any does not represent. You can switch languages ​​as needed.